b)Frequency:50Hz/60Hz

c)Rotate Speed:15r/min　12.5r/min

d)Input Power:14w

The voltage of the stand can be supplied in 24V, 110V or 220V for the customer's request.

ASSEMBLY TECHNIQUES
Figure 1 shows the structure of the Dancing Stand. Each level of the Dancing Stand was disassembled
and packed separately for shipping. Please read the following instructions carefully BEFORE you begin
assembly.

1． Inspection: Carefully open the package and check if there are any damaged or missing parts.
Hand-check if all the joints are smooth except the joints connected to the motor on the bottom. …
(After inspection, set all parts aside. Follow the instructions for assembly.)

2． Assembly of the curly poles: lay the bottom shelf down on the floor, and insert 4 curly poles. Make
sure that the surface of the curly pole is leveled with the bottom shelf before insertion. Do not force
insertion or use a hammer (you may break the parts). Insert each curly pole one at a time.

3． Assembly of the middle shelves (with openings on both sides of the four spherical corners): Turn all
the curly poles in the same direction as the main curly pole (the one hooks to the motor). Level the
middle shelf with all four curly poles. Insert the middle shelf into the four curly poles slowly and with
slight force. Follow the instructions above to assemble the remaining curly poles and middle shelves.
Finally, assemble the top shelf (with opening only on one side).

4． Tighten the screws on all the curly poles using a small-sized, (-) shaped screw. Do not use a large-
sized screw (you may damage the curly poles).

5． Testing: After assembly, check to make sure that the voltage and electricity are compatible before
plugging. After plugging, press the button on the bottom shelf to turn on the Dancing Stand. Press one
more time to turn it off. If the Dancing Stand is running smoothly, the assembly has succeeded. If not,
please check to make sure that all the above instructions has been followed correctly.

IMPORTANT POINTS FOR PROPER USE

1. Before using the Dancing Stand for the first time, please check to see if it's sturdy and firm. Check to
make sure the voltage and electricity are compatible.

2. Protection: Users may install an additional device to protect against power surge.

3. Please do not overload the Dancing Stand (otherwise it may be damaged or get stuck). The
maximum load for each level of the shelf is 4KG.

4. Turn off the power button or unplug the plug when the Dancing Stand will not be used for a
long period of time.